See the project's [documentation](https://the-draupnir-project.github.io/draupnir-documentation/) to learn what it does and why it might be useful to you.
This documentation page is about installing Draupnir in bot mode. As an alternative, you can run a multi-instance Draupnir deployment by installing [Draupnir in appservice mode](./configuring-playbook-appservice-draupnir-for-all.md) (called Draupnir-for-all) instead.
Using your own account, create a new invite only room that you will use to manage the bot. This is the room where you will see the status of the bot and where you will send commands to the bot, such as the command to ban a user from another room.
It is possible to make the management room encrypted (E2EE). If doing so, then you need to enable the native E2EE support (see [below](#native-e2ee-support)).
Once you have created the room you need to copy the room ID so you can specify it on your `inventory/host_vars/matrix.example.com/vars.yml` file. In Element Web you can check the ID by going to the room's settings and clicking "Advanced". The room ID will look something like `!qporfwt:example.com`.
Decide whether you want to support having an encrypted management room or not. Draupnir can still protect encrypted rooms without encryption support enabled.
Refer to Draupnir's [documentation](https://the-draupnir-project.github.io/draupnir-documentation/moderator/managing-protected-rooms#protecting-encrypted-rooms) for more details about why you might want to care about encryption support for protected rooms.
### Disable Pantalaimon for Draupnir (since v2.0.0; optional)
It is known that running Draupnir along with Pantalaimon breaks all workflows that involve answering prompts with reactions.
If you are updating Draupnir from v1.x.x and have enabled Pantalaimon for it, you can disable Pantalaimon in favor of the native E2EE support. To disable Pantalaimon, remove the configuration `matrix_bot_draupnir_pantalaimon_use: true` from your `vars.yml` file.
**Note**: because the management room is still encrypted, disabling it without enabling the native E2EE support will break the management room.
Note that native E2EE requires a clean access token that has not touched E2EE so curl is recommended as a method to obtain it. **The access token obtained via Element Web does not work with it**. Refer to the documentation on [how to obtain an access token via curl](obtaining-access-tokens.md#obtain-an-access-token-via-curl).
To enable the native E2EE support, add the following configuration to your `vars.yml` file. Make sure to replace `CLEAN_ACCESS_TOKEN_HERE` with the access token you obtained just now.
To enable the bot, add the following configuration to your `vars.yml` file. Make sure to replace `MANAGEMENT_ROOM_ID_HERE` with the one of the room which you have created earlier.
If your homeserver's implementation is Synapse, you will need to prevent it from rate limiting the bot's account. **This is a highly recommended step. If you do not configure it, Draupnir performance will be degraded.**
This can be done using Synapse's [Admin APIs](https://element-hq.github.io/synapse/latest/admin_api/user_admin_api.html#override-ratelimiting-for-users). They can be accessed both externally and internally.
**Note**: access to the APIs is restricted with a valid access token, so exposing them publicly should not be a real security concern. Still, doing so is not recommended for additional security. See [official Synapse reverse-proxying recommendations](https://element-hq.github.io/synapse/latest/reverse_proxy.html#synapse-administration-endpoints).
The APIs can also be accessed via [Synapse Admin](https://github.com/etkecc/synapse-admin), a web UI tool you can use to administrate users, rooms, media, etc. on your Matrix server. The playbook can install and configure Synapse Admin for you. For details about it, see [this page](configuring-playbook-synapse-admin.md).
Manual access to Synapse's Admin APIs requires an access token for a homeserver admin account. Refer to the documentation on [how to obtain an access token](obtaining-access-tokens.md).
⚠️ **Warning**: Access tokens are sensitive information. Do not include them in any bug reports, messages, or logs. Do not share the access token with anyone.
To disable rate limiting, run the following command on systems that ship curl (note that it does not work on outdated Windows 10). Even if the APIs are not exposed to the internet, you should still be able to run the command on the homeserver locally. Before running it, make sure to replace `@bot.draupnir:example.com` with the MXID of your Draupnir:
The bot can intercept the report API endpoint of the client-server API, which requires integration with the reverse proxy in front of the homeserver. If you are using Traefik, this playbook can set this up for you:
The other method polls an Synapse Admin API endpoint, hence it is available only if using Synapse and if the Draupnir user is an admin (see [above](#register-the-bot-account)). To enable it, set `pollReports: true` on `vars.yml` file as below.
There are some additional things you may wish to configure about the bot.
Take a look at:
-`roles/custom/matrix-bot-draupnir/defaults/main.yml` for some variables that you can customize via your `vars.yml` file. You can override settings (even those that don't have dedicated playbook variables) using the `matrix_bot_draupnir_configuration_extension_yaml` variable
Note that Draupnir supports E2EE natively, so you can enable it instead of Pantalaimon. It is recommended to consult the instruction [here](#native-e2ee-support).
<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
You can refer to the upstream [documentation](https://the-draupnir-project.github.io/draupnir-documentation/) for additional ways to use and configure Draupnir and for a more detailed usage guide.
Below is a **non-exhaustive quick-start guide** for the impatient.
1. Invite the bot to the room manually ([inviting Draupnir to rooms](https://the-draupnir-project.github.io/draupnir-documentation/moderator/managing-protected-rooms#inviting-draupnir-to-rooms)). Before joining, the bot *may* ask for confirmation in the Management Room
2. [Give the bot permissions to do its job](#giving-draupnir-permissions-to-do-its-job)
3. Tell it to protect the room (using the [rooms command](https://the-draupnir-project.github.io/draupnir-documentation/moderator/managing-protected-rooms#using-the-draupnir-rooms-command)) by sending the following command to the Management Room: `!draupnir rooms add !qporfwt:example.com`
To have Draupnir provide useful room protection, you need do to a bit more work (at least the first time around). You may wish to [Subscribe to a public policy list](#subscribing-to-a-public-policy-list), [Create your own own policy and rules](#creating-your-own-policy-lists-and-rules) and [Enabling built-in protections](#enabling-built-in-protections).
For Draupnir to do its job, you need to [give it permissions](https://the-draupnir-project.github.io/draupnir-documentation/moderator/managing-protected-rooms#giving-draupnir-permissions) in rooms it's protecting. This involves **giving it an Administrator power level**.
**We recommend setting this power level as soon as the bot joins your room** (and before you create new rules), so that it can apply rules as soon as they are available. If the bot is under-privileged, it may fail to apply protections and may not retry for a while (or until your restart it).
### Subscribing to a public policy list
We recommend **subscribing to a public [policy list](https://the-draupnir-project.github.io/draupnir-documentation/concepts/policy-lists)** using the [watch command](https://the-draupnir-project.github.io/draupnir-documentation/moderator/managing-policy-lists#using-draupnirs-watch-command-to-subscribe-to-policy-rooms).
Polcy lists are maintained in Matrix rooms. A popular policy list is maintained in the public `#community-moderation-effort-bl:neko.dev` room.
You can tell Draupnir to subscribe to it by sending the following command to the Management Room: `!draupnir watch #community-moderation-effort-bl:neko.dev`
We also recommend **creating your own policy lists** with the [list create](https://the-draupnir-project.github.io/draupnir-documentation/moderator/managing-policy-lists#using-draupnirs-list-create-command-to-create-a-policy-room) command.
You can do so by sending the following command to the Management Room: `!draupnir list create my-bans my-bans-bl`. This will create a policy list having a name (shortcode) of `my-bans` and stored in a public `#my-bans-bl:example.com` room on your server. As soon as you run this command, the bot will invite you to the policy list room.
A policy list does nothing by itself, so the next step is **adding some rules to your policy list**. Policies target a so-called `entity` (one of: `user`, `room` or `server`). These entities are mentioned on the [policy lists](https://the-draupnir-project.github.io/draupnir-documentation/concepts/policy-lists) documentation page and in the Matrix Spec [here](https://spec.matrix.org/v1.11/client-server-api/#mban-recommendation).
The simplest and most useful entity to target is `user`. Below are a few examples using the [ban command](https://the-draupnir-project.github.io/draupnir-documentation/moderator/managing-users#the-ban-command) and targeting users.
To create rules, you run commands in the Management Room (**not** in the policy list room).
- (ban all users on a given homeserver by using a [wildcard](https://the-draupnir-project.github.io/draupnir-documentation/moderator/managing-users#wildcards)): `!draupnir ban @*:example.org my-bans Spam server - all users are fake`
As a result of running these commands, you may observe:
- applying these rules against all rooms that Draupnir is an Administrator in
You can undo bans with the [unban command](https://the-draupnir-project.github.io/draupnir-documentation/moderator/managing-users#the-unban-command).
### Enabling built-in protections
You can also **turn on various built-in [protections](https://the-draupnir-project.github.io/draupnir-documentation/protections)** like `JoinWaveShortCircuit` ("If X amount of users join in Y time, set the room to invite-only").
To **see which protections are available and which are enabled**, send a `!draupnir protections` command to the Management Room.
To **see the configuration options for a given protection**, send a `!draupnir protections show PROTECTION_NAME` (e.g. `!draupnir protections show JoinWaveShortCircuit`).
To **set a specific option for a given protection**, send a command like this: `!draupnir config set PROTECTION_NAME.OPTION VALUE` (e.g. `!draupnir config set JoinWaveShortCircuit.timescaleMinutes 30`).
To **enable a given protection**, send a command like this: `!draupnir enable PROTECTION_NAME` (e.g. `!draupnir enable JoinWaveShortCircuit`).
To **disable a given protection**, send a command like this: `!draupnir disable PROTECTION_NAME` (e.g. `!draupnir disable JoinWaveShortCircuit`).
