- Replace links to the documentation with ones to projects' README files, if these have been linked to the project directly
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
This way, the "installing" sections would cover from beginners to advanced (professional) readers.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "just run-tags install-all/setup-all,start" with "just install-all/setup-all"
Thanks to the tip by Slavi that the overhead of ensure-matrix-users-created is negligible.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Edit installing instructions
- Move the anchor links to docs/just.md
- Add note about running "ensure-matrix-users-created" tags, if ansible-playbook's tags not "setup-all,ensure-matrix-users-created,start", ie. either "setup-all,start", "setup-email2matrix,start", "setup-aux-files,setup-corporal,start", or "setup-matrix-user-verification-service,start"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update descriptions about installation
- Introduce the most conservative and stable raw ansible-playbook command.
- Introduce the just commands on installing.md and maintenance-upgrading-services.md, not on quick-start.md, since it is too early for quick start guide readers who are just starting to climb learning curve to use the shortcuts.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: remove the note about ensure-matrix-users-created
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace installation command shortcut for the "just" program with the most conservative raw ansible-playbook command
This commit replaces installation command shortcut ("recipe") for the "just" program with the raw ansible-playbook command, so that the shortcut will be added to it later. The command is so conservative that failure of the command will mean something is clearly broken.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add comments about using setup-all instead of install-all
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about shortcut command with the "just" program to the ansible-playbook command with "setup-all" and "start" tags
It also explains difference between "just install-all" and "just setup-all" recipes. The explanation is based on docs/playbook-tags.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update raw ansible-playbook command to have it do what "just install-all" or "just setup-all" does
Since "just install-all" or "just setup-all" invokes "ensure-matrix-users-created" as well, it needs adding to the raw ansible-playbook command.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove "ensure-matrix-users-created" from the raw ansible-playbook command which does not need it
Also: update the "just" recipes accordingly. "just install-all" and "just setup-all" run "ensure-matrix-users-created" tag as well, therefore they need to be replaced with "run-tags" recipes to skip "ensure-matrix-users-created"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: add ensure-matrix-users-created to the raw ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about "ensure-matrix-users-created" and create a list with description about shortcut commands with "just"
This commit also fixes list item capitalization and punctuation.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes bullet lists
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-matrix-corporal.md and docs/configuring-playbook-email2matrix.md: adopt common instructions
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "run the installation command" with "run the playbook with tags"
Now that shortcut commands for the "just" program are displayed along with the existing "installation command", this commit replaces "run the installation command" with "run the playbook with tags" in order to prevent misunderstanding and confusion.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes about changing passwords of users specified on vars.yml
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-synapse-admin.md: add the playbook command and just recipes
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove redundant blank lines
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-alertmanager-receiver.md: remove the direction to proceed to Usage
Such a kind of direction is not used on other documentation, so it should be fine to just remove it.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/importing-synapse-media-store.md: code block for ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
This adopts the structure of docs/configuring-playbook-matrix-authentication-service.md which was recently created.
- …
- Adjusting the playbook configuration
- …
- Adjusting the (service name here) URL
- …
- Adjusting DNS records
- Installing
- …
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Overall the playbook uses the expression "Add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file:" with the heading "Adjusting the playbook configuration" for sections to explain what to be added as variables
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Inital work, copeid from mautrix-amp PR
* Some fixes leftover code copeid over from whatsapp
* Got it to run and register
* Fixed service issue with docker image
* I now realize I need 2 roles wsproxy and imessage
* Got someting working, still rough
* Closer to working but still not working
* reverting ports
* Update main.yml
* Add matrix-nginx-proxy config for mautrix-wsproxy
* Changed
* Add back file
* fix for error hopefully
* Changed the the way nginx was recieved
* basically did not add anything ugh
* Added some arguments
* just trying stuff now
* Ugh i messed up port number
* Changed docs
* Change dns config
* changed generic secret key
* Testing new nginx proxy
* test
* Fix linting errors
* Add mautrix syncproxy to wsproxy for Android SMS
* WIP
* Move wsproxy to custom
* Squashed commit of the following:
commit 943189a9aa
Merge: 4a229d68f5a09f30
Author: Slavi Pantaleev <slavi@devture.com>
Date: Sun Nov 13 08:54:32 2022 +0200
Merge pull request #2259 from throny/patch-3
warn users about upgrading to pg15 when using borg
commit 4a229d6870
Merge: 9b326e08c68def08
Author: Slavi Pantaleev <slavi@devture.com>
Date: Sun Nov 13 08:53:13 2022 +0200
Merge pull request #2260 from etkecc/patch-117
Update ntfy 1.28.0 -> 1.29.0
commit f5a09f30b7
Author: throny <m.throne12@gmail.com>
Date: Sat Nov 12 23:48:57 2022 +0100
Update maintenance-postgres.md
commit b12cdbd99d
Author: throny <m.throne12@gmail.com>
Date: Sat Nov 12 23:40:46 2022 +0100
Update maintenance-postgres.md
commit c68def0809
Author: Aine <97398200+etkecc@users.noreply.github.com>
Date: Sat Nov 12 22:01:31 2022 +0000
Update ntfy 1.28.0 -> 1.29.0
commit adbc09f152
Author: throny <m.throne12@gmail.com>
Date: Sat Nov 12 11:20:43 2022 +0100
warn users about upgrading to pg15 when using borg
* Fix linting errors
* Cleanup after merge
* Correct outdated variable names
* Enable both Android and iMessage with wsproxy
* Restructure wsproxy service defs and nginx config
* Fix linter errors
* Apply suggestions from code review
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Fix comments for documentation, volumes and ports
* Correct mount syntax
* Complete network and traefik support for wsproxy
* Remove wsproxy data_path
* Fix wsproxy service definitions
* Actually include syncproxy service
* Remove wsproxy PathPrefix, it needs a subdomain
There's no setting in the iMessage bridge that allows a path.
Also don't bind port by default, wsproxy has no TLS.
Syncproxy should never expose a port, it's only internal.
---------
Co-authored-by: hanthor <jreilly112@gmail.com>
Co-authored-by: Miguel Alatzar <miguel@natrx.io>
Co-authored-by: Shreyas Ajjarapu <github.tzarina@aleeas.com>
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
