This way, the "installing" sections would cover from beginners to advanced (professional) readers.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "just run-tags install-all/setup-all,start" with "just install-all/setup-all"
Thanks to the tip by Slavi that the overhead of ensure-matrix-users-created is negligible.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Edit installing instructions
- Move the anchor links to docs/just.md
- Add note about running "ensure-matrix-users-created" tags, if ansible-playbook's tags not "setup-all,ensure-matrix-users-created,start", ie. either "setup-all,start", "setup-email2matrix,start", "setup-aux-files,setup-corporal,start", or "setup-matrix-user-verification-service,start"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update descriptions about installation
- Introduce the most conservative and stable raw ansible-playbook command.
- Introduce the just commands on installing.md and maintenance-upgrading-services.md, not on quick-start.md, since it is too early for quick start guide readers who are just starting to climb learning curve to use the shortcuts.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: remove the note about ensure-matrix-users-created
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace installation command shortcut for the "just" program with the most conservative raw ansible-playbook command
This commit replaces installation command shortcut ("recipe") for the "just" program with the raw ansible-playbook command, so that the shortcut will be added to it later. The command is so conservative that failure of the command will mean something is clearly broken.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add comments about using setup-all instead of install-all
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about shortcut command with the "just" program to the ansible-playbook command with "setup-all" and "start" tags
It also explains difference between "just install-all" and "just setup-all" recipes. The explanation is based on docs/playbook-tags.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update raw ansible-playbook command to have it do what "just install-all" or "just setup-all" does
Since "just install-all" or "just setup-all" invokes "ensure-matrix-users-created" as well, it needs adding to the raw ansible-playbook command.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove "ensure-matrix-users-created" from the raw ansible-playbook command which does not need it
Also: update the "just" recipes accordingly. "just install-all" and "just setup-all" run "ensure-matrix-users-created" tag as well, therefore they need to be replaced with "run-tags" recipes to skip "ensure-matrix-users-created"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: add ensure-matrix-users-created to the raw ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about "ensure-matrix-users-created" and create a list with description about shortcut commands with "just"
This commit also fixes list item capitalization and punctuation.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes bullet lists
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-matrix-corporal.md and docs/configuring-playbook-email2matrix.md: adopt common instructions
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "run the installation command" with "run the playbook with tags"
Now that shortcut commands for the "just" program are displayed along with the existing "installation command", this commit replaces "run the installation command" with "run the playbook with tags" in order to prevent misunderstanding and confusion.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes about changing passwords of users specified on vars.yml
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-synapse-admin.md: add the playbook command and just recipes
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove redundant blank lines
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-alertmanager-receiver.md: remove the direction to proceed to Usage
Such a kind of direction is not used on other documentation, so it should be fine to just remove it.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/importing-synapse-media-store.md: code block for ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Triple backticks with syntax highlighting: yml → yaml
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Triple backticks with syntax highlighting: yaml and sh
The strings "yml" were replaced with "yaml" as the latter is used more than the former.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Triple backticks with syntax highlighting: INI
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: remove redundant white space characters after triple backticks
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "Element" with "Element Web"
- If Element indicates the web application, then it is changed to Element Web.
- If it indicates clients branded with Element such as Element desktop, web, mobile clients, then it is changed to Element clients.
- If it is combined with location sharing functionality, it is not changed.
with other some changes, including:
- Change "app.element.io" anchor link to "https://github.com/element-hq/element-web" on README.md, following other documentation files
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "SchildiChat" with "SchildiChat Web"
- If SchildiChat indicates the web application, then it is changed to SchildiChat Web.
- If it indicates clients branded with SchildiChat such as SchildiChat desktop, web, mobile clients, then it is changed to SchildiChat clients.
- If it is combined with location sharing functionality, it is not changed.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Rename configuring-playbook-client-schildichat.md to configuring-playbook-client-schildichat-web.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Rename configuring-playbook-client-element.md to configuring-playbook-client-element-web.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
This adopts the structure of docs/configuring-playbook-matrix-authentication-service.md which was recently created.
- …
- Adjusting the playbook configuration
- …
- Adjusting the (service name here) URL
- …
- Adjusting DNS records
- Installing
- …
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
The newly extracted role also has native Traefik support,
so we no longer need to rely on `matrix-nginx-proxy` for
reverse-proxying to Ntfy.
The new role uses port `80` inside the container (not `8080`, like
before), because that's the default assumption of the officially
published container image. Using a custom port (like `8080`), means the
default healthcheck command (which hardcodes port `80`) doesn't work.
Instead of fiddling to override the healthcheck command, we've decided
to stick to the default port instead. This only affects the
inside-the-container port, not any external ports.
The new role also supports adding the network ranges of the container's
multiple additional networks as "exempt hosts". Previously, only one
network's address range was added to "exempt hosts".
