[README.md] Improve format selection documentation

README.md

@@ -464,15 +464,74 @@ youtube-dl_test_video_.mp4          # A simple file name
 
 # FORMAT SELECTION
 
-By default youtube-dl tries to download the best quality, but sometimes you may want to download in a different format.
+By default youtube-dl tries to download the best available quality, i.e. if you want the best quality you **don't need** to pass any special options, youtube-dl will guess it for you by **default**.
-The simplest case is requesting a specific format, for example `-f 22`. You can get the list of available formats using `--list-formats`, you can also use a file extension (currently it supports aac, m4a, mp3, mp4, ogg, wav, webm) or the special names `best`, `bestvideo`, `bestaudio` and `worst`.
 
-If you want to download multiple videos and they don't have the same formats available, you can specify the order of preference using slashes, as in `-f 22/17/18`. You can also filter the video results by putting a condition in brackets, as in `-f "best[height=720]"` (or `-f "[filesize>10M]"`).  This works for filesize, height, width, tbr, abr, vbr, asr, and fps and the comparisons <, <=, >, >=, =, != and for ext, acodec, vcodec, container, and protocol and the comparisons =, !=, ^= (begins with), $= (ends with), *= (contains) . Formats for which the value is not known are excluded unless you put a question mark (?) after the operator. You can combine format filters, so  `-f "[height <=? 720][tbr>500]"` selects up to 720p videos (or videos where the height is not known) with a bitrate of at least 500 KBit/s. Use commas to download multiple formats, such as `-f 136/137/mp4/bestvideo,140/m4a/bestaudio`. You can merge the video and audio of two formats into a single file using `-f <video-format>+<audio-format>` (requires ffmpeg or avconv), for example `-f bestvideo+bestaudio`. Format selectors can also be grouped using parentheses, for example if you want to download the best mp4 and webm formats with a height lower than 480 you can use `-f '(mp4,webm)[height<480]'`.
+But sometimes you may want to download in a different format, for example when you are on a slow or intermittent connection. The key mechanism for achieving this is so called *format selection* based on which you can explicitly specify desired format, select formats based on some criterion or criteria, setup precedence and much more.
 
-Since the end of April 2015 and version 2015.04.26 youtube-dl uses `-f bestvideo+bestaudio/best` as default format selection (see #5447, #5456). If ffmpeg or avconv are installed this results in downloading `bestvideo` and `bestaudio` separately and muxing them together into a single file giving the best overall quality available. Otherwise it falls back to `best` and results in downloading the best available quality served as a single file. `best` is also needed for videos that don't come from YouTube because they don't provide the audio and video in two different files. If you want to only download some dash formats (for example if you are not interested in getting videos with a resolution higher than 1080p), you can add `-f bestvideo[height<=?1080]+bestaudio/best` to your configuration file. Note that if you use youtube-dl to stream to `stdout` (and most likely to pipe it to your media player then), i.e. you explicitly specify output template as `-o -`, youtube-dl still uses `-f best` format selection in order to start content delivery immediately to your player and not to wait until `bestvideo` and `bestaudio` are downloaded and muxed.
+The general syntax for format selection is `--format FORMAT` or shorter `-f FORMAT` where `FORMAT` is a *selector expression*, i.e. an expression that describes format or formats you would like to download.
+
+The simplest case is requesting a specific format, for example with `-f 22` you can download the format with format code equal to 22. You can get the list of available format codes for particular video using `--list-formats` or `-F`. Note that these format codes are extractor specific. 
+
+You can also use a file extension (currently `3gp`, `aac`, `flv`, `m4a`, `mp3`, `mp4`, `ogg`, `wav`, `webm` are supported) to download best quality format of particular file extension served as a single file, e.g. `-f webm` will download best quality format with `webm` extension served as a single file.
+
+You can also use special names to select particular edge case format:
+ - `best`: Select best quality format represented by single file with video and audio
+ - `worst`: Select worst quality format represented by single file with video and audio
+ - `bestvideo`: Select best quality video only format (e.g. DASH video), may not be available
+ - `worstvideo`: Select worst quality video only format, may not be available
+ - `bestaudio`: Select best quality audio only format, may not be available
+ - `worstaudio`: Select worst quality audio only format, may not be available
+
+For example, to download worst quality video only format you can use `-f worstvideo`.
+
+If you want to download multiple videos and they don't have the same formats available, you can specify the order of preference using slashes. Note that slash is left-associative, i.e. formats on the left hand side are preferred, for example `-f 22/17/18` will download format 22 if it's available, otherwise it will download format 17 if it's available, otherwise it will download format 18 if it's available, otherwise it will complain that no suitable formats are available for download.
+
+If you want to download several formats of the same video use comma as a separator, e.g. `-f 22,17,18` will download all these three formats, of course if they are available. Or more sophisticated example combined with precedence feature `-f 136/137/mp4/bestvideo,140/m4a/bestaudio`.
+
+You can also filter the video formats by putting a condition in brackets, as in `-f "best[height=720]"` (or `-f "[filesize>10M]"`).
+
+The following numeric meta fields can be used with comparisons `<`, `<=`, `>`, `>=`, `=` (equals), `!=` (not equals):
+ - `filesize`: The number of bytes, if known in advance
+ - `width`: Width of the video, if known
+ - `height`: Height of the video, if known
+ - `tbr`: Average bitrate of audio and video in KBit/s
+ - `abr`: Average audio bitrate in KBit/s
+ - `vbr`: Average video bitrate in KBit/s
+ - `asr`: Audio sampling rate in Hertz
+ - `fps`: Frame rate
+
+Also filtering work for comparisons `=` (equals), `!=` (not equals), `^=` (begins with), `$=` (ends with), `*=` (contains) and following string meta fields:
+ - `ext`: File extension
+ - `acodec`: Name of the audio codec in use
+ - `vcodec`: Name of the video codec in use
+ - `container`: Name of the container format
+ - `protocol`: The protocol that will be used for the actual download, lower-case. `http`, `https`, `rtsp`, `rtmp`, `rtmpe`, `m3u8`, or `m3u8_native`
+
+Note that none of the aforementioned meta fields are guaranteed to be present since this solely depends on the metadata obtained by particular extractor, i.e. the metadata offered by video hoster.
+
+Formats for which the value is not known are excluded unless you put a question mark (`?`) after the operator. You can combine format filters, so `-f "[height <=? 720][tbr>500]"` selects up to 720p videos (or videos where the height is not known) with a bitrate of at least 500 KBit/s.
+
+You can merge the video and audio of two formats into a single file using `-f <video-format>+<audio-format>` (requires ffmpeg or avconv installed), for example `-f bestvideo+bestaudio` will download best video only format, best audio only format and mux them together with ffmpeg/avconv.
+
+Format selectors can also be grouped using parentheses, for example if you want to download the best mp4 and webm formats with a height lower than 480 you can use `-f '(mp4,webm)[height<480]'`.
+
+Since the end of April 2015 and version 2015.04.26 youtube-dl uses `-f bestvideo+bestaudio/best` as default format selection (see #5447, #5456). If ffmpeg or avconv are installed this results in downloading `bestvideo` and `bestaudio` separately and muxing them together into a single file giving the best overall quality available. Otherwise it falls back to `best` and results in downloading the best available quality served as a single file. `best` is also needed for videos that don't come from YouTube because they don't provide the audio and video in two different files. If you want to only download some DASH formats (for example if you are not interested in getting videos with a resolution higher than 1080p), you can add `-f bestvideo[height<=?1080]+bestaudio/best` to your configuration file. Note that if you use youtube-dl to stream to `stdout` (and most likely to pipe it to your media player then), i.e. you explicitly specify output template as `-o -`, youtube-dl still uses `-f best` format selection in order to start content delivery immediately to your player and not to wait until `bestvideo` and `bestaudio` are downloaded and muxed.
 
 If you want to preserve the old format selection behavior (prior to youtube-dl 2015.04.26), i.e. you want to download the best available quality media served as a single file, you should explicitly specify your choice with `-f best`. You may want to add it to the [configuration file](#configuration) in order not to type it every time you run youtube-dl.
 
+Examples (note on Windows you may need to use double quotes instead of single):
+```bash
+# Download best mp4 format available or any other best if no mp4 available
+$ youtube-dl -f 'bestvideo[ext=mp4]+bestaudio[ext=m4a]/best[ext=mp4]/best'
+
+# Download best format available but not better that 480p
+$ youtube-dl -f 'bestvideo[height<=480]+bestaudio/best[height<=480]'
+
+# Download best video only format but no bigger that 50 MB
+$ youtube-dl -f 'best[filesize<50M]'
+```
+
+
 # VIDEO SELECTION
 
 Videos can be filtered by their upload date using the options `--date`, `--datebefore` or `--dateafter`. They accept dates in two formats: