yuzu/src/core/hle/service/dsp_dsp.cpp

319 lines
11 KiB
C++

// Copyright 2014 Citra Emulator Project
// Licensed under GPLv2 or any later version
// Refer to the license.txt file included.
#include "common/logging/log.h"
#include "core/hle/hle.h"
#include "core/hle/kernel/event.h"
#include "core/hle/service/dsp_dsp.h"
////////////////////////////////////////////////////////////////////////////////////////////////////
// Namespace DSP_DSP
namespace DSP_DSP {
static u32 read_pipe_count;
static Kernel::SharedPtr<Kernel::Event> semaphore_event;
static Kernel::SharedPtr<Kernel::Event> interrupt_event;
void SignalInterrupt() {
// TODO(bunnei): This is just a stub, it does not do anything other than signal to the emulated
// application that a DSP interrupt occurred, without specifying which one. Since we do not
// emulate the DSP yet (and how it works is largely unknown), this is a work around to get games
// that check the DSP interrupt signal event to run. We should figure out the different types of
// DSP interrupts, and trigger them at the appropriate times.
if (interrupt_event != 0)
interrupt_event->Signal();
}
/**
* DSP_DSP::ConvertProcessAddressFromDspDram service function
* Inputs:
* 1 : Address
* Outputs:
* 1 : Result of function, 0 on success, otherwise error code
* 2 : (inaddr << 1) + 0x1FF40000 (where 0x1FF00000 is the DSP RAM address)
*/
static void ConvertProcessAddressFromDspDram(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
u32 addr = cmd_buff[1];
cmd_buff[1] = 0; // No error
cmd_buff[2] = (addr << 1) + (Memory::DSP_RAM_VADDR + 0x40000);
LOG_WARNING(Service_DSP, "(STUBBED) called with address 0x%08X", addr);
}
/**
* DSP_DSP::LoadComponent service function
* Inputs:
* 1 : Size
* 2 : Unknown (observed only half word used)
* 3 : Unknown (observed only half word used)
* 4 : (size << 4) | 0xA
* 5 : Buffer address
* Outputs:
* 1 : Result of function, 0 on success, otherwise error code
* 2 : Component loaded, 0 on not loaded, 1 on loaded
*/
static void LoadComponent(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
u32 size = cmd_buff[1];
u32 unk1 = cmd_buff[2];
u32 unk2 = cmd_buff[3];
u32 new_size = cmd_buff[4];
u32 buffer = cmd_buff[5];
cmd_buff[1] = 0; // No error
cmd_buff[2] = 1; // Pretend that we actually loaded the DSP firmware
// TODO(bunnei): Implement real DSP firmware loading
LOG_WARNING(Service_DSP, "(STUBBED) called size=0x%X, unk1=0x%08X, unk2=0x%08X, new_size=0x%X, buffer=0x%08X",
size, unk1, unk2, new_size, buffer);
}
/**
* DSP_DSP::GetSemaphoreEventHandle service function
* Outputs:
* 1 : Result of function, 0 on success, otherwise error code
* 3 : Semaphore event handle
*/
static void GetSemaphoreEventHandle(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
cmd_buff[1] = RESULT_SUCCESS.raw; // No error
cmd_buff[3] = Kernel::g_handle_table.Create(semaphore_event).MoveFrom(); // Event handle
LOG_WARNING(Service_DSP, "(STUBBED) called");
}
/**
* DSP_DSP::FlushDataCache service function
*
* This Function is a no-op, We aren't emulating the CPU cache any time soon.
*
* Inputs:
* 1 : Address
* 2 : Size
* 3 : Value 0, some descriptor for the KProcess Handle
* 4 : KProcess handle
* Outputs:
* 1 : Result of function, 0 on success, otherwise error code
*/
static void FlushDataCache(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
u32 address = cmd_buff[1];
u32 size = cmd_buff[2];
u32 process = cmd_buff[4];
// TODO(purpasmart96): Verify return header on HW
cmd_buff[1] = RESULT_SUCCESS.raw; // No error
LOG_DEBUG(Service_DSP, "(STUBBED) called address=0x%08X, size=0x%X, process=0x%08X",
address, size, process);
}
/**
* DSP_DSP::RegisterInterruptEvents service function
* Inputs:
* 1 : Parameter 0 (purpose unknown)
* 2 : Parameter 1 (purpose unknown)
* 4 : Interrupt event handle
* Outputs:
* 1 : Result of function, 0 on success, otherwise error code
*/
static void RegisterInterruptEvents(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
u32 param0 = cmd_buff[1];
u32 param1 = cmd_buff[2];
u32 event_handle = cmd_buff[4];
auto evt = Kernel::g_handle_table.Get<Kernel::Event>(cmd_buff[4]);
if (evt != nullptr) {
interrupt_event = evt;
cmd_buff[1] = 0; // No error
} else {
LOG_ERROR(Service_DSP, "called with invalid handle=%08X", cmd_buff[4]);
// TODO(yuriks): An error should be returned from SendSyncRequest, not in the cmdbuf
cmd_buff[1] = -1;
}
LOG_WARNING(Service_DSP, "(STUBBED) called param0=%u, param1=%u, event_handle=0x%08X", param0, param1, event_handle);
}
/**
* DSP_DSP::WriteReg0x10 service function
* Inputs:
* 1 : Unknown (observed only half word used)
* Outputs:
* 1 : Result of function, 0 on success, otherwise error code
*/
static void WriteReg0x10(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
SignalInterrupt();
cmd_buff[1] = 0; // No error
LOG_WARNING(Service_DSP, "(STUBBED) called");
}
/**
* DSP_DSP::WriteProcessPipe service function
* Inputs:
* 1 : Number
* 2 : Size
* 3 : (size <<14) | 0x402
* 4 : Buffer
* Outputs:
* 0 : Return header
* 1 : Result of function, 0 on success, otherwise error code
*/
static void WriteProcessPipe(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
u32 number = cmd_buff[1];
u32 size = cmd_buff[2];
u32 new_size = cmd_buff[3];
u32 buffer = cmd_buff[4];
cmd_buff[1] = RESULT_SUCCESS.raw; // No error
LOG_WARNING(Service_DSP, "(STUBBED) called number=%u, size=0x%X, new_size=0x%X, buffer=0x%08X",
number, size, new_size, buffer);
}
/**
* DSP_DSP::ReadPipeIfPossible service function
* Inputs:
* 1 : Unknown
* 2 : Unknown
* 3 : Size in bytes of read (observed only lower half word used)
* 0x41 : Virtual address to read from DSP pipe to in memory
* Outputs:
* 1 : Result of function, 0 on success, otherwise error code
* 2 : Number of bytes read from pipe
*/
static void ReadPipeIfPossible(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
u32 unk1 = cmd_buff[1];
u32 unk2 = cmd_buff[2];
u32 size = cmd_buff[3] & 0xFFFF;// Lower 16 bits are size
VAddr addr = cmd_buff[0x41];
// Canned DSP responses that games expect. These were taken from HW by 3dmoo team.
// TODO: Remove this hack :)
static const std::array<u16, 16> canned_read_pipe = {{
0x000F, 0xBFFF, 0x9E8E, 0x8680, 0xA78E, 0x9430, 0x8400, 0x8540,
0x948E, 0x8710, 0x8410, 0xA90E, 0xAA0E, 0xAACE, 0xAC4E, 0xAC58
}};
u32 initial_size = read_pipe_count;
for (unsigned offset = 0; offset < size; offset += sizeof(u16)) {
if (read_pipe_count < canned_read_pipe.size()) {
Memory::Write16(addr + offset, canned_read_pipe[read_pipe_count]);
read_pipe_count++;
} else {
LOG_ERROR(Service_DSP, "canned read pipe log exceeded!");
break;
}
}
cmd_buff[1] = 0; // No error
cmd_buff[2] = (read_pipe_count - initial_size) * sizeof(u16);
LOG_WARNING(Service_DSP, "(STUBBED) called unk1=0x%08X, unk2=0x%08X, size=0x%X, buffer=0x%08X",
unk1, unk2, size, addr);
}
/**
* DSP_DSP::SetSemaphoreMask service function
* Inputs:
* 1 : Mask
* Outputs:
* 1 : Result of function, 0 on success, otherwise error code
*/
static void SetSemaphoreMask(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
u32 mask = cmd_buff[1];
cmd_buff[1] = RESULT_SUCCESS.raw; // No error
LOG_WARNING(Service_DSP, "(STUBBED) called mask=0x%08X", mask);
}
/**
* DSP_DSP::GetHeadphoneStatus service function
* Inputs:
* 1 : None
* Outputs:
* 1 : Result of function, 0 on success, otherwise error code
* 2 : The headphone status response, 0 = Not using headphones?,
* 1 = using headphones?
*/
static void GetHeadphoneStatus(Service::Interface* self) {
u32* cmd_buff = Kernel::GetCommandBuffer();
cmd_buff[1] = RESULT_SUCCESS.raw; // No error
cmd_buff[2] = 0; // Not using headphones?
LOG_DEBUG(Service_DSP, "(STUBBED) called");
}
const Interface::FunctionInfo FunctionTable[] = {
{0x00010040, nullptr, "RecvData"},
{0x00020040, nullptr, "RecvDataIsReady"},
{0x00030080, nullptr, "SendData"},
{0x00040040, nullptr, "SendDataIsEmpty"},
{0x00070040, WriteReg0x10, "WriteReg0x10"},
{0x00080000, nullptr, "GetSemaphore"},
{0x00090040, nullptr, "ClearSemaphore"},
{0x000B0000, nullptr, "CheckSemaphoreRequest"},
{0x000C0040, ConvertProcessAddressFromDspDram, "ConvertProcessAddressFromDspDram"},
{0x000D0082, WriteProcessPipe, "WriteProcessPipe"},
{0x001000C0, ReadPipeIfPossible, "ReadPipeIfPossible"},
{0x001100C2, LoadComponent, "LoadComponent"},
{0x00120000, nullptr, "UnloadComponent"},
{0x00130082, FlushDataCache, "FlushDataCache"},
{0x00140082, nullptr, "InvalidateDCache"},
{0x00150082, RegisterInterruptEvents, "RegisterInterruptEvents"},
{0x00160000, GetSemaphoreEventHandle, "GetSemaphoreEventHandle"},
{0x00170040, SetSemaphoreMask, "SetSemaphoreMask"},
{0x00180040, nullptr, "GetPhysicalAddress"},
{0x00190040, nullptr, "GetVirtualAddress"},
{0x001A0042, nullptr, "SetIirFilterI2S1_cmd1"},
{0x001B0042, nullptr, "SetIirFilterI2S1_cmd2"},
{0x001C0082, nullptr, "SetIirFilterEQ"},
{0x001F0000, GetHeadphoneStatus, "GetHeadphoneStatus"},
{0x00210000, nullptr, "GetIsDspOccupied"},
};
////////////////////////////////////////////////////////////////////////////////////////////////////
// Interface class
Interface::Interface() {
semaphore_event = Kernel::Event::Create(RESETTYPE_ONESHOT, "DSP_DSP::semaphore_event");
interrupt_event = nullptr;
read_pipe_count = 0;
Register(FunctionTable);
}
Interface::~Interface() {
semaphore_event = nullptr;
interrupt_event = nullptr;
}
} // namespace