matrix-docker-ansible-deploy/docs/configuring-playbook-bridge-beeper-linkedin.md
Suguru Hirahara 20c2aade3e
Edit descriptions about installation of components (#3842)
* Replace installation command shortcut for the "just" program with the most conservative raw ansible-playbook command

This commit replaces installation command shortcut ("recipe") for the "just" program with the raw ansible-playbook command, so that the shortcut will be added to it later. The command is so conservative that failure of the command will mean something is clearly broken.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Add comments about using setup-all instead of install-all

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Add description about shortcut command with the "just" program to the ansible-playbook command with "setup-all" and "start" tags

It also explains difference between "just install-all" and "just setup-all" recipes. The explanation is based on docs/playbook-tags.md

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update raw ansible-playbook command to have it do what "just install-all" or "just setup-all" does

Since "just install-all" or "just setup-all" invokes "ensure-matrix-users-created" as well, it needs adding to the raw ansible-playbook command.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Remove "ensure-matrix-users-created" from the raw ansible-playbook command which does not need it

Also: update the "just" recipes accordingly. "just install-all" and "just setup-all" run "ensure-matrix-users-created" tag as well, therefore they need to be replaced with "run-tags" recipes to skip "ensure-matrix-users-created"

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update docs/configuring-playbook-etherpad.md: add ensure-matrix-users-created to the raw ansible-playbook

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Add description about "ensure-matrix-users-created" and create a list with description about shortcut commands with "just"

This commit also fixes list item capitalization and punctuation.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Add notes bullet lists

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update docs/configuring-playbook-matrix-corporal.md and docs/configuring-playbook-email2matrix.md: adopt common instructions

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Replace "run the installation command" with "run the playbook with tags"

Now that shortcut commands for the "just" program are displayed along with the existing "installation command", this commit replaces "run the installation command" with "run the playbook with tags" in order to prevent misunderstanding and confusion.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Add notes about changing passwords of users specified on vars.yml

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update docs/configuring-playbook-synapse-admin.md: add the playbook command and just recipes

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Remove redundant blank lines

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update docs/configuring-playbook-alertmanager-receiver.md: remove the direction to proceed to Usage

Such a kind of direction is not used on other documentation, so it should be fine to just remove it.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update docs/importing-synapse-media-store.md: code block for ansible-playbook

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

---------

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
2024-12-01 09:42:30 +02:00

78 lines
4.0 KiB
Markdown

# Setting up Beeper Linkedin bridging (optional)
The playbook can install and configure [beeper-linkedin](https://github.com/beeper/linkedin) for you, for bridging to [LinkedIn](https://www.linkedin.com/) Messaging. This bridge is based on the mautrix-python framework and can be configured in a similar way to the other mautrix bridges
See the project's [documentation](https://github.com/beeper/linkedin/blob/master/README.md) to learn what it does and why it might be useful to you.
## Adjusting the playbook configuration
To enable the bridge, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
```yaml
matrix_beeper_linkedin_enabled: true
```
There are some additional things you may wish to configure about the bridge before you continue.
Encryption support is off by default. If you would like to enable encryption, add the following to your `vars.yml` file:
```yaml
matrix_beeper_linkedin_configuration_extension_yaml: |
bridge:
encryption:
allow: true
default: true
```
If you would like to be able to administrate the bridge from your account it can be configured like this:
```yaml
matrix_beeper_linkedin_configuration_extension_yaml: |
bridge:
permissions:
'@YOUR_USERNAME:example.com': admin
```
You may wish to look at `roles/custom/matrix-bridge-beeper-linkedin/templates/config.yaml.j2` to find other things you would like to configure.
## Installing
After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
```sh
ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
```
**Notes**:
- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
## Set up Double Puppeting by enabling Appservice Double Puppet or Shared Secret Auth
The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service is configured and enabled on the server for this playbook.
Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service works at the time of writing, but is deprecated and will stop working in the future.
## Usage
You then need to start a chat with `@linkedinbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
Send `login YOUR_LINKEDIN_EMAIL_ADDRESS` to the bridge bot to enable bridging for your LinkedIn account.
If you run into trouble, check the [Troubleshooting](#troubleshooting) section below.
After successfully enabling bridging, you may wish to [set up Double Puppeting](#set-up-double-puppeting-by-enabling-appservice-double-puppet-or-shared-secret-auth), if you haven't already done so.
## Troubleshooting
### Bridge asking for 2FA even if you don't have 2FA enabled
If you don't have 2FA enabled and are logging in from a strange IP for the first time, LinkedIn will send an email with a one-time code. You can use this code to authorize the bridge session. In my experience, once the IP is authorized, you will not be asked again.