mirror of
https://github.com/spantaleev/matrix-docker-ansible-deploy.git
synced 2024-12-23 04:55:46 +00:00
20c2aade3e
* Replace installation command shortcut for the "just" program with the most conservative raw ansible-playbook command
This commit replaces installation command shortcut ("recipe") for the "just" program with the raw ansible-playbook command, so that the shortcut will be added to it later. The command is so conservative that failure of the command will mean something is clearly broken.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add comments about using setup-all instead of install-all
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about shortcut command with the "just" program to the ansible-playbook command with "setup-all" and "start" tags
It also explains difference between "just install-all" and "just setup-all" recipes. The explanation is based on docs/playbook-tags.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update raw ansible-playbook command to have it do what "just install-all" or "just setup-all" does
Since "just install-all" or "just setup-all" invokes "ensure-matrix-users-created" as well, it needs adding to the raw ansible-playbook command.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove "ensure-matrix-users-created" from the raw ansible-playbook command which does not need it
Also: update the "just" recipes accordingly. "just install-all" and "just setup-all" run "ensure-matrix-users-created" tag as well, therefore they need to be replaced with "run-tags" recipes to skip "ensure-matrix-users-created"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: add ensure-matrix-users-created to the raw ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about "ensure-matrix-users-created" and create a list with description about shortcut commands with "just"
This commit also fixes list item capitalization and punctuation.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes bullet lists
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-matrix-corporal.md and docs/configuring-playbook-email2matrix.md: adopt common instructions
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "run the installation command" with "run the playbook with tags"
Now that shortcut commands for the "just" program are displayed along with the existing "installation command", this commit replaces "run the installation command" with "run the playbook with tags" in order to prevent misunderstanding and confusion.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes about changing passwords of users specified on vars.yml
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-synapse-admin.md: add the playbook command and just recipes
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove redundant blank lines
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-alertmanager-receiver.md: remove the direction to proceed to Usage
Such a kind of direction is not used on other documentation, so it should be fine to just remove it.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/importing-synapse-media-store.md: code block for ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
110 lines
7.4 KiB
Markdown
110 lines
7.4 KiB
Markdown
# Setting up Mautrix Discord bridging (optional)
|
|
|
|
**Note**: bridging to [Discord](https://discordapp.com/) can also happen via the [mx-puppet-discord](configuring-playbook-bridge-mx-puppet-discord.md) and [matrix-appservice-discord](configuring-playbook-bridge-appservice-discord.md) bridges supported by the playbook.
|
|
- For using as a Bot we recommend the [Appservice Discord](configuring-playbook-bridge-appservice-discord.md), because it supports plumbing.
|
|
- For personal use with a discord account we recommend the `mautrix-discord` bridge (the one being discussed here), because it is the most fully-featured and stable of the 3 Discord bridges supported by the playbook.
|
|
|
|
The playbook can install and configure [mautrix-discord](https://github.com/mautrix/discord) for you.
|
|
|
|
See the project's [documentation](https://docs.mau.fi/bridges/go/discord/index.html) to learn what it does and why it might be useful to you.
|
|
|
|
|
|
## Prerequisites
|
|
|
|
There are 2 ways to login to discord using this bridge, either by [scanning a QR code](#method-1-login-using-qr-code-recommended) using the Discord mobile app **or** by using a [Discord token](#method-2-login-using-discord-token-not-recommended).
|
|
|
|
If this is a dealbreaker for you, consider using one of the other Discord bridges supported by the playbook: [mx-puppet-discord](configuring-playbook-bridge-mx-puppet-discord.md) or [matrix-appservice-discord](configuring-playbook-bridge-appservice-discord.md). These come with their own complexity and limitations, however, so we recommend that you proceed with this one if possible.
|
|
|
|
### Enable Appservice Double Puppet or Shared Secret Auth (optional)
|
|
|
|
If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
|
|
|
|
For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
|
|
|
|
## Adjusting the playbook configuration
|
|
|
|
To enable the bridge, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
|
|
|
|
```yaml
|
|
matrix_mautrix_discord_enabled: true
|
|
```
|
|
|
|
You may optionally wish to add some [Additional configuration](#additional-configuration), or to [prepare for double-puppeting](#set-up-double-puppeting) before the initial installation.
|
|
|
|
### Additional configuration
|
|
|
|
There are some additional things you may wish to configure about the bridge.
|
|
|
|
Take a look at:
|
|
|
|
- `roles/custom/matrix-bridge-mautrix-discord/defaults/main.yml` for some variables that you can customize via your `vars.yml` file
|
|
- `roles/custom/matrix-bridge-mautrix-discord/templates/config.yaml.j2` for the bridge's default configuration. You can override settings (even those that don't have dedicated playbook variables) using the `matrix_mautrix_discord_configuration_extension_yaml` variable
|
|
|
|
## Installing
|
|
|
|
After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
|
|
|
|
<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
|
|
```sh
|
|
ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
|
|
```
|
|
|
|
**Notes**:
|
|
|
|
- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
|
|
|
|
- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
|
|
|
|
`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
|
|
|
|
## Usage
|
|
|
|
### Logging in
|
|
|
|
#### Method 1: Login using QR code (recommended)
|
|
|
|
For using this bridge, you would need to authenticate by **scanning a QR code** with the Discord app on your phone.
|
|
|
|
You can delete the Discord app after the authentication process.
|
|
|
|
#### Method 2: Login using Discord token (not recommended)
|
|
|
|
To acquire the token, open Discord in a private browser window. Then open the developer settings (keyboard shortcut might be "ctrl+shift+i" or by pressing "F12"). Navigate to the "Network" tab then reload the page. In the URL filter or search bar type "/api" and find the response with the file name of "library". Under the request headers you should find a variable called "Authorization", this is the token to your Discord account. After copying the token, you can close the browser window.
|
|
|
|
### Bridging
|
|
|
|
1. Start a chat with `@discordbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
|
|
2. If you would like to login to Discord using a token, send `login-token` command, otherwise, send `login-qr` command.
|
|
3. You'll see a QR code which you need to scan with the Discord app on your phone. You can scan it with the camera app too, which will open Discord, which will then instruct you to scan it a 2nd time in the Discord app.
|
|
4. After confirming (in the Discord app) that you'd like to allow this login, the bot should respond with "Succcessfully authenticated as ..."
|
|
5. Now that you're logged in, you can send a `help` command to the bot again, to see additional commands you have access to
|
|
6. Some Direct Messages from Discord should start syncing automatically
|
|
7. If you'd like to bridge guilds:
|
|
- send `guilds status` to see the list of guilds
|
|
- for each guild that you'd like bridged, send `guilds bridge GUILD_ID --entire`
|
|
8. You may wish to uninstall the Discord app from your phone now. It's not needed for the bridge to function.
|
|
|
|
### 💡 Set up Double Puppeting
|
|
|
|
After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
|
|
|
|
To set it up, you have 2 ways of going about it.
|
|
|
|
#### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
|
|
|
|
The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service is configured and enabled on the server for this playbook.
|
|
|
|
Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
|
|
|
|
Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service works at the time of writing, but is deprecated and will stop working in the future.
|
|
|
|
#### Method 2: manually, by asking each user to provide a working access token
|
|
|
|
When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
|
|
|
|
- retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).
|
|
|
|
- send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
|
|
|
|
- make sure you don't log out the `Mautrix-Discord` device some time in the future, as that would break the Double Puppeting feature
|