mirror of
https://github.com/spantaleev/matrix-docker-ansible-deploy.git
synced 2024-12-23 04:55:46 +00:00
20c2aade3e
* Replace installation command shortcut for the "just" program with the most conservative raw ansible-playbook command
This commit replaces installation command shortcut ("recipe") for the "just" program with the raw ansible-playbook command, so that the shortcut will be added to it later. The command is so conservative that failure of the command will mean something is clearly broken.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add comments about using setup-all instead of install-all
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about shortcut command with the "just" program to the ansible-playbook command with "setup-all" and "start" tags
It also explains difference between "just install-all" and "just setup-all" recipes. The explanation is based on docs/playbook-tags.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update raw ansible-playbook command to have it do what "just install-all" or "just setup-all" does
Since "just install-all" or "just setup-all" invokes "ensure-matrix-users-created" as well, it needs adding to the raw ansible-playbook command.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove "ensure-matrix-users-created" from the raw ansible-playbook command which does not need it
Also: update the "just" recipes accordingly. "just install-all" and "just setup-all" run "ensure-matrix-users-created" tag as well, therefore they need to be replaced with "run-tags" recipes to skip "ensure-matrix-users-created"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: add ensure-matrix-users-created to the raw ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about "ensure-matrix-users-created" and create a list with description about shortcut commands with "just"
This commit also fixes list item capitalization and punctuation.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes bullet lists
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-matrix-corporal.md and docs/configuring-playbook-email2matrix.md: adopt common instructions
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "run the installation command" with "run the playbook with tags"
Now that shortcut commands for the "just" program are displayed along with the existing "installation command", this commit replaces "run the installation command" with "run the playbook with tags" in order to prevent misunderstanding and confusion.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes about changing passwords of users specified on vars.yml
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-synapse-admin.md: add the playbook command and just recipes
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove redundant blank lines
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-alertmanager-receiver.md: remove the direction to proceed to Usage
Such a kind of direction is not used on other documentation, so it should be fine to just remove it.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/importing-synapse-media-store.md: code block for ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
42 lines
2.7 KiB
Markdown
42 lines
2.7 KiB
Markdown
# Setting up postgres backup (optional)
|
|
|
|
The playbook can install and configure [docker-postgres-backup-local](https://github.com/prodrigestivill/docker-postgres-backup-local) for you via the [ansible-role-postgres-backup](https://github.com/mother-of-all-self-hosting/ansible-role-postgres-backup) Ansible role.
|
|
|
|
For a more complete backup solution (one that includes not only Postgres, but also other configuration/data files), you may wish to look into [BorgBackup](configuring-playbook-backup-borg.md) instead.
|
|
|
|
|
|
## Adjusting the playbook configuration
|
|
|
|
To enable Postgres backup, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
|
|
|
|
```yaml
|
|
postgres_backup_enabled: true
|
|
```
|
|
|
|
Refer to the table below for additional configuration variables and their default values.
|
|
|
|
|
|
| Name | Default value | Description |
|
|
| :-------------------------------- | :--------------------------- | :--------------------------------------------------------------- |
|
|
|`postgres_backup_enabled`|`false`|Set to true to use [docker-postgres-backup-local](https://github.com/prodrigestivill/docker-postgres-backup-local) to create automatic database backups|
|
|
|`postgres_backup_schedule`| `'@daily'` |Cron-schedule specifying the interval between postgres backups.|
|
|
|`postgres_backup_keep_days`|`7`|Number of daily backups to keep|
|
|
|`postgres_backup_keep_weeks`|`4`|Number of weekly backups to keep|
|
|
|`postgres_backup_keep_months`|`12`|Number of monthly backups to keep|
|
|
|`postgres_backup_base_path` | `"{{ matrix_base_data_path }}/postgres-backup"` | Base path for postgres-backup. Also see `postgres_backup_data_path` |
|
|
|`postgres_backup_data_path` | `"{{ postgres_backup_base_path }}/data"` | Storage path for postgres-backup database backups |
|
|
|
|
|
|
## Installing
|
|
|
|
After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
|
|
|
|
<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
|
|
```sh
|
|
ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
|
|
```
|
|
|
|
The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
|
|
|
|
`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
|